The "RACER V1" did not pass the CG tests. The point of gravity is not functional for this design, is very close to the drift, and does not allow room for the battery.
The model will bebrectified and will have a different design
I made several changes to improve the implementation of the wings, the CG point and the design of the model. It was smaller than the first version, but was more balanced. The model will have more sustainable ... tests will confirm ... I hope so.
I've done the tests of "CG" point of "RACER V1" and has been approved. I will start construction next week. I have prepared the setup: HET 2w20,6x3,85A,4S
Então e esta beleza já voou? como conssegues estabilizar o avião sem asa trazeira? o controlo deve ser tipo os das asas voadoras, mas aquele cauda sem asa atrás é que me parte todo, fica muito fixe mas n fica muito pesado atraz desiquilibrando-o? Sei que dá trabalho, mas ums videos era muito porreiro :) Bom trabalho
Boas Obrigado pelos comentários. Vou tentar manter isto activo. Este já voou e bem, o truque deste modelo é realmente o ponto de equilibrio, a curta distância entre a deriva e as asas. Este modelo é muito rápido, infelizmente já o parti todo! eheh Voltarei a fezer outro porque gostei bastante.
Gostava d eter mais tempo para dedicar a isto, mas não tenho tido tempo.
Hello It makes a few times i want to try to build your beautiful racer V1. After a couple of hours to draw the detailled plan , I now start the construction. I'll post some photos soon Thanks for the fantastic design of this plane! I hope it flies...:-D
Dear Mr. Martins,
ReplyDeleteI am interested in plans for the Racer V1
And the Super.Stryke D1
What weight fiberglass cloth do you use on the these planes
Thanks
John
Hello
ReplyDeleteI'll start to develop the "RACER V1" in the next week and only then I will have the plan available.
The "Super.Stryke D1" is also not finished.
I will put all the developments of the work on the blog next week.
Thanks, Nelson Martins
HI
ReplyDeleteThe "RACER V1" did not pass the CG tests.
The point of gravity is not functional for this design, is very close to the drift, and does not allow room for the battery.
The model will bebrectified and will have a different design
I'll make "CG" tests today of this new version of "RACER V1"
ReplyDeleteI made several changes to improve the implementation of the wings, the CG point and the design of the model.
ReplyDeleteIt was smaller than the first version, but was more balanced.
The model will have more sustainable ... tests will confirm ... I hope so.
I've done the tests of "CG" point of "RACER V1" and has been approved.
ReplyDeleteI will start construction next week.
I have prepared the setup: HET 2w20,6x3,85A,4S
I used vinyl and epoxy to fix the engine.
ReplyDeleteThis thing is getting good aspect.
ReplyDeleteWill fly like a Pylon, I mounted a 6x4 APC for powerful speed.
Already covers the wing with fiberglass, it was pretty tough. Lack fiber fuselage.
ReplyDeleteAlmost finished!
ReplyDeleteI chose to put the battery door on the underside of the fuselage to keep the design cleaner
ReplyDeleteEntão e esta beleza já voou? como conssegues estabilizar o avião sem asa trazeira? o controlo deve ser tipo os das asas voadoras, mas aquele cauda sem asa atrás é que me parte todo, fica muito fixe mas n fica muito pesado atraz desiquilibrando-o? Sei que dá trabalho, mas ums videos era muito porreiro :) Bom trabalho
ReplyDeleteBoas
ReplyDeleteObrigado pelos comentários.
Vou tentar manter isto activo.
Este já voou e bem, o truque deste modelo é realmente o ponto de equilibrio, a curta distância entre a deriva e as asas.
Este modelo é muito rápido, infelizmente já o parti todo! eheh
Voltarei a fezer outro porque gostei bastante.
Gostava d eter mais tempo para dedicar a isto, mas não tenho tido tempo.
Vou ver o que posso fazer. Abraço vai passando.
Hi,please,when the plans will be available??
ReplyDeleteThanks
This model is already available for download. the plan is not completely finished.
ReplyDeleteDo not cuts the batteries holes without first understand the plan.
I would like that you participate more in the blog, send your work and doubts.
Thanks
Thanks for the plan nelson ;)
ReplyDeleteHello
ReplyDeleteIt makes a few times i want to try to build your beautiful racer V1. After a couple of hours to draw the detailled plan , I now start the construction. I'll post some photos soon
Thanks for the fantastic design of this plane! I hope it flies...:-D
I've started a post here
ReplyDeletehttp://www.modelisme.com/forum/aero-racer-et-dogfight/171798-besoin-de-conseils-pour-racerv1-en-depron.html